喷雾干燥-固相煅烧法制备球形钛酸狸负极材料的研究

通过喷雾干燥-固相煅烧法制备了球形钛酸钾.不同于传统喷雾干燥工艺采用固态钛源进行制备,本文采用的前驱体是钾盐,分散剂和钛酸四丁酯制备出的硝酸氧钛的混合溶液.由于制备方法中前驱体为原子级均匀分布,化学计量比可精确控制,制备出的材料颗粒细小,粒径、成分分布均匀,电化学性能优异.同时研究了不同钾钛摩尔比以及煅烧温度对球形钛酸钾的形貌和成分的影响,并研究了其作为钾离子电池电极材料的电化学性能.结果表明,钾钛摩尔比为0.816,煅烧温度为 800 ℃时钛酸钾的电化学性能最好,首圈容量 185.1 mAh/g,30 圈后容量为173.9 mAh/g,循环100圈后还有169.7 mAh/g的容量.     

SiC中间层对金刚石涂层硬质合金刀具膜 基界面结合性能的影响

基于第一性原理分别计算了WC-Co/Graphite/Diamond、WC-Co/SiCC-Si/Diamond和WC-Co/SiCSi-C/Diamond界面模型的粘附功、断裂韧性,分析了电子结构和态密度.结果表明:Graphite/Diamond界面粘附功极小,金刚石在石墨基面上成核不良;WC-Co/Graphite界面处Co与C(Graphite)原子具有同种电荷而相斥,添加SiC中间层改变了界面处原子的电荷分配与成键方式,WC-Co/SiC界面Co与C(或Si)原子具有异种电荷而相吸,且Co-Si(SiC)键强于Co-C(SiC)键;SiC/Diamond界面C(SiC)-C(Diamond)键强于Si(SiC)-C(Diamond)键.因此,三种界面模型中各界面的粘附功SiCSi-C/Diamond>SiCC-Si/Diamond>WC-Co/SiCSi-C>WC-Co/SiCC-Si>WC-Co/Graphite>Graphite/Diamond.总之,添加SiC中间层提高了金刚石涂层硬质合金刀具膜基界面结合性能.     

Syntheses,crystal structures and properties of Cd(II) and Ag(I) complexes based on 2-p-methylphenyl-5-(2-pyridyl)-1,3,4-thiadiazole

Abstract

Complexes of [CdL₂(NO₃)₂]·1.5H₂O and [Ag₂(μ-L)₂(NO₃)₂] were synthesized by the reactions of 2-p-methylphenyl-5-(2-pyridyl)-1,3,4-thiadiazole (L) with Cd(NO₃)₂·4H₂O and AgNO₃, respectively. Their structures were determined by single crystal X-ray diffraction. The photophysical property and thermal stability were characterized by FT???IR, UV???Vis absorption, fluorescence, and thermogravimetric analysis (TGA). Both complexes belong to the triclinic system with space group p???1. The central metal of [CdL₂(NO₃)₂]·1.5H₂O has a distorted octahedral geometry [CdN₄O₂], while two central Ag(I) atoms of [Ag₂(μ-L)₂(NO₃)₂] exhibit distorted tetrahedral geometries [AgN₃O].     

狄拉克材料BaMnBi2的单晶制备和物理性质研究

在本工作中,我们成功制备了层状过渡金属磷族化合物BaMnBi2单晶样品,并研究了该化合物的磁学性质和电学输运性质.准二维化合物BaMnBi2具有四方晶体结构,主要包含有两个Bi四方格子层和一个共边的MnBi4四面体层.磁化率显示BaMnBi2在TN ＝288 K以下发生反铁磁相变,并表现出很强的磁各向异性.在反铁磁相变温度TN 以上,磁化率随温度呈线性关系,暗示体系在顺磁态具有很强的反铁磁关联.电阻率随温度变化曲线和在磁场下电阻率随角度的变化曲线都表明BaMnBi2具有准二维的电子结构.磁场导致的金属-绝缘体转变和低温下大的非饱和线性磁阻,与Bi四方格子层存在狄拉克费米子是一致的.     

化学法改性煤沥青脱除苯并芘的研究

在管式反应器中采用苯甲酸、聚乙二醇、固体古马隆树脂（S）、液体古马隆树脂（L）为添加剂来降低煤沥青中有害物质苯并芘的含量，以期使得煤沥青可绿色化应用。采用紫外-可见分光光度计分析煤沥青中苯并芘含量。考察了反应温度、反应时间、添加剂添加量、催化剂等工艺条件对添加剂脱除煤沥青中苯并芘的影响。结果表明，不同工艺条件能降低煤沥青中苯并芘的含量。在优化条件下，不同添加剂对苯并芘脱除率由高到低依次为：液体古马隆树脂、聚乙二醇、苯甲酸和固体古马隆树脂。分析其反应机理，这与催化剂的酸性相关，发生亲电取代反应。结果表明，液体古马隆树脂（L）在催化剂存在下对煤沥青中苯并芘脱除率可达73.0%，显示了良好的应用前景。     

Synthesis of γ-(Arylamino)butyric Acid Derivatives via Ring-Opening Addition of Arylamines to Cyclopropane-1,1-Dicarboxylates

Russian Journal of Organic Chemistry - A rapid and efficient catalytic approach has been proposed for the synthesis of dimethyl 2-[2-(aryl-amino)but-3-en-1-yl]- and...     

ZnO-PSAⅡ型异质结界面电荷转移过程研究

采用稳态光致发光光谱和纳秒时间分辨瞬态光谱(NTRT-PL)表征,揭示ZnO-PSA II型纳米异质结光生载流子电荷转移过程,通过甲基橙光降解实验,测得ZnO-NRs和ZnO-PSA紫外光降解率分别为25.5;和60.1;,光降解率提高到2.4倍,表明II型异质结相对于单一半导体而言,能促进光生载流子在界面间电荷转移,有利于载流子的分离.     

Athermal and Soft Multi-Nanopatterning of Azopolymers: Phototunable Mechanical Properties

Imprinting nanopatterns on flexible substrates has diverse applications in advanced fabrication. However, the traditional thermal nanoimprint lithography (T-NIL) often causes shrinkage upon cooling. Here, a simple yet versatile method is introduced to fabricate multiple nanopatterns on a flexible substrate coated with an azopolymer by combining athermal nanoimprint lithography (AT-NIL) and photolithography. The azopolymer has various mechanical properties upon photoirradiation: 1) phototunable glass-transition temperatures (T_g) and concomitantly photoinduced switch from glassy plastic to viscoplastic polymer; 2) prominent modulation of viscoplasticity under light illumination at different wavelengths. Regionally selective multiple nanopatterns are conveniently fabricated, presenting angle-dependent structural color images on poly(ethylene terephthalate) (PET) substrates. The flexible, athermal and multiple nanopatterning method has the potential for on-demand fabrication of complex nanopatterns.     

有限群共轭类长度的一点注记

假设G=AB是子群A和B的互相置换积。通过A?B中元素的共轭类长度给出了群G的结构，推广了一些最近的结论。